How to operate a coaxial stripper?

Coaxial wire stripping machine is a highly efficient wire harness processing equipment. Compared with traditional wire stripping machines, coaxial wire stripping machines have a higher degree of intelligence. While saving labor costs, they can also better meet the needs of various wire harness production and processing. Nowadays, coaxial wire stripping machines are widely used in various fields of life. Understanding the operation method of coaxial wire stripping machines can better guide practical production. Now, let Dianzhen Machinery give us a simple operation process of coaxial wire stripping machines!

Firstly, before starting the coaxial stripping machine, it is necessary to conduct a line inspection to ensure that there are no issues with the line connection. Then set the relevant data according to the requirements to ensure the accuracy of wire stripping, so as to meet the basic needs; Secondly, during operation, attention should be paid to various details to ensure that the incoming position is not blocked. If there is any noise, it should be checked in a timely manner, and the wire material should be guided reasonably.

Finally, the coaxial wire stripping machine needs to be adjusted according to the actual situation. To prepare, the cutting length, rolling number, and number of wires should be set according to the requirements, and the cross-sectional area of the cut wires should meet the requirements. During the debugging process, it is necessary to carefully check the performance of the wire taking motor, wire feeding motor, and main motor to ensure safe operation and prevent slipping. Safe operation of coaxial wire stripping machines requires attention to various details, strict adherence to relevant instructions and steps, mastery of the working principle of coaxial wire stripping machines, and better guidance for operation.

While operating the coaxial wire stripping machine, it is also necessary to understand its related precautions. The operator of the coaxial wire stripping machine must be trained and guided by professional personnel before operating. The operator should be familiar with the general performance and structure of the machine, and master the prevention, judgment, and emergency handling measures for equipment failures. When leaving the machine during the production process, the machine should be paused until the person leaves the machine and stops. During the operation of the machine, fingers should not be placed near the tool holder and chuck to prevent injury from pinching. When a malfunction occurs, the machine should be stopped immediately. If there is a short circuit, smoke, or leakage in the circuit, the power supply should be cut off and the fault should be eliminated before starting up. The equipment should not be operated under overload with the fault.

The above is the content explained today. We hope it can be helpful to you. If you want to learn more about related information, please feel free to consult our customer service online or call our service hotline (located in the upper right corner of the website) for consultation. We will wholeheartedly provide you with high-quality service!