Components of automatic wire stripping machine and methods to extend its service life

Automatic wire stripping machine is a machine that peels off the plastic outer skin and metal core wrapped around wires and other materials. What are the components of an automatic wire stripping machine? What are the methods to extend the service life of automatic wire stripping machines?

1、 Components of automatic wire stripping machine

Inlet wheel: transmission line and strip steel head. When peeling off the beginning and end of a short line. When the thread falls off from the steam lift tower, in addition to the steam lift tower head, it also has the function of lifting the middle part of the steam.

Wire stripping wheel: used for the conveyor line of automatic wire stripping machines to strip the tail of metal wires.

Adjustment knob for gap between wire feeding wheels: Adjust the gap of the automatic wire stripping machine to increase the twisting gap and decrease the twisting downward gap (adjusted according to the thickness of the wire).

Pressure adjustment knob for the inlet wheel of the stripping tower: Adjust the pressure of the inlet wheel of the steam lifting tower. After pulling it out, rotate it clockwise to increase the pressure of the feed wheel. After pulling it out, rotate it counterclockwise. One of the computer steam lifters is in good condition, and the pressure of the feed wheel decreases. According to the strength of the wire, it is difficult for the stripping machine to strip, the pressure is difficult to increase, and the pressure is easy to reduce.

Lifting knob: The automatic wire stripping machine lifts the feed wheel when it is perforated. Rotate the knob clockwise to lift the feed wheel and allow it to pass through the wire smoothly; When working, put down the feeding wheel and turn the knob counterclockwise to press down the wire.

Outlet Wheel Pressure Adjustment Knob: Adjust the outlet wheel pressure by rotating counterclockwise after pulling out to increase the outlet wheel pressure, and clockwise after pulling out to decrease the inlet wheel pressure. According to the strength of the steel wire, it is difficult to peel off, difficult to increase pressure, and easy to decrease pressure.

Lifting knob: When removing the wire, lift the pulley and replace the knob counterclockwise. Lift the pulley to ensure smooth disassembly of the wire; When working, put down the exit wheel, replace the knob clockwise, and lower the exit wheel. When using short belt projects, qualified wheels should be used.

Knife holder assembly: On an automatic wire stripping machine, responsible for cutting lines, stripping heads, and stripping tails. When the machine stops, it is necessary to fully open the upper and lower blades to allow the metal wire to pass through the tool smoothly.

2、 Methods to Extend the Service Life of Automatic Wire Stripping Machines

If you are a customer who is purchasing an automatic wire stripping machine for the first time, you need to have a certain basic knowledge of operation. This not only ensures personal safety, but also reduces damage to the equipment during use. Customers without corresponding knowledge will definitely make some mistakes during use, which is the reason for the low service life of the product.

When using an automatic wire stripping machine, if there are any malfunctions or other abnormal phenomena, it is necessary to promptly seek repair work from maintenance personnel, rather than relying on people without professional knowledge. Non professional personnel can easily affect the performance and lifespan of the product.

3. The environment in which the equipment is used contains a lot of dust or debris. Operators should try to clean the equipment as much as possible every day, and then add lubricating oil about 12 hours after the equipment runs, so that the equipment can be maintained in a good condition and extend its service life.

So that's all for today's explanation. That's all for today's content. I believe everyone has a certain understanding of the main components of automatic wire stripping machines and methods to extend their service life. Thank you very much for your patient reading. If you want to learn more about the automatic wire stripping machine, you can call the service hotline in the upper right corner to consult with us.