Reasons for wire deviation in semi-automatic coaxial wire stripper

The main reasons for the deviation of coaxial wire stripping machine wires in semi-automatic coaxial wire stripping machines are twofold. One is the centering module, and the other is the clamping part. The centering module determines the accurate position of the wire stripping. If there is a problem with the centering module, it may cause the wire core to be damaged on one side and the stripping on the other side to be incomplete, resulting in a deviation phenomenon. The deviation caused by the clamping position is mainly on the gripper. There are debris on the gripper and the gripper is not in the correct position, which can cause wire stripping to deviate. In addition, the loosening of the screws that fix the clamp can indirectly cause claw problems, which can also occur.

For computer wire stripping machines, the occurrence of deviation is mainly related to factors such as material blockage, the wire harness itself, the conduit, and the wire feeding wheel. Blockage and compression may cause the wire harness to deviate; In terms of the wiring harness itself, problems such as uneven wiring harness and wiring harness quality may also cause peeling and deviation; The catheter is not straight, the catheter is not centered, the wire feeding wheel is loose, and other equipment problems caused by the equipment itself or later use. In addition, since it is a peeling issue, it is naturally related to the tool holder part. Tool holder offset, blade wear, loose blade fixing parts, etc., can all cause the peeled line to deviate.

When there is a problem of wire deviation, first determine the location of the deviation, preliminarily judge the possible reasons for the deviation based on the wire deviation situation, and then investigate. If the deviation still exists, a new wire can be used to test the machine. When the above methods cannot solve the problem of deviation, it is necessary to contact the wire stripping machine supplier for assistance in resolving it. In addition, the coaxial wire stripping machine should be cleaned and maintained before and after use to extend its service life and ensure processing accuracy.