Reasons for malfunction of coaxial stripping machine and operational requirements

Coaxial stripping machine is mainly used for cable stripping, with the characteristics of simple operation and the ability to cut according to the specified cable length. So, what are the reasons and operating requirements for coaxial stripping machine failures?

1、 Reasons for the malfunction of coaxial peeling machine

Wire head cannot be peeled: Check the depth of the cutting line and adjust the cable diameter. The gap between the three-phase five wire conveyor wheels is too large. Adjust the gap between the three-phase five wire conveyor wheels. The thickness of a single wire and the manufacturing length of twisted products can affect the quality of the twisting machine.

If it is a concentric layer of twisted wire, the computer wire stripping machine factory first needs to consider the number and size of the winding machine reels, whether they are suitable for the winding machine, and then consider the twisting direction, pitch length, and whether to untwist. Is the stripping head set to exceed 3mm? There is dirt inside the conduit. Is the feed setting too large and needs to be reduced.

Wire tail cannot be peeled: Check the depth of the laser cutting line and adjust the cable diameter; The gap between the group's outgoing transmission wheels is too large, adjust the gap between the group's outgoing transmission wheels. Is the stripping head set to exceed 3mm? The feed setting is too large and needs to be adjusted smaller.

2、 Operation requirements for coaxial peeling machine

Before starting the coaxial peeling machine, it is necessary to check the wiring to ensure that there are no issues with the connection. Then set relevant data according to the requirements to ensure wire stripping accuracy and meet basic needs; Secondly, attention should be paid to various details during operation, keeping the incoming line position unobstructed, checking noise in a timely manner, and guiding wire transportation reasonably.

The coaxial peeling machine should be adjusted according to the actual situation. The preparation is to set the tangent length, rolling number, and strip number according to the requirements, and the tangent section should meet the requirements. During the debugging process, the performance of the line taking motor, transmission motor, and host motor should be carefully checked to ensure safe operation and avoid slipping. The safe operation of the coaxial peeling machine requires attention to various details, strict adherence to relevant instructions and steps, mastery of the working principle of the coaxial peeling machine, and better guidance for operation.