Details and maintenance items to be noted during the operation of coaxial peeling machine

Coaxial stripping machine is mainly used for cable stripping, with the characteristics of simple operation and the ability to cut according to the specified cable length. Let's learn about the details and maintenance items that need to be paid attention to during the operation of coaxial stripping machine?

Details to be noted during the operation of coaxial peeling machine:

According to the process documents, it is required to adjust the cable stripping length and core wire stripping length, adjust the up and down (left and right) cutting positions, check whether the compressed air supply is normal, adjust the air flow of the cylinder, plug in the power supply, and use the foot switch to control the equipment to start running.

2. After cutting a few pieces, check the length and core wire quality of the product to ensure compliance with the process documents. After checking that the product is qualified, start and continue production normally. When stripping the wire, hands should not enter the protective cover to avoid injury from the machine.

When stopping midway, please unplug the power plug and let someone leave. The machine will be powered off to prevent others from accidentally stepping on the foot switch and causing injury.

If it is necessary to replace the wire stripping blade, the power and gas must be cut off before replacement.

Maintenance items for coaxial peeling machine after use:

1. Maintenance of wire stripping tool holder:

When cleaning up waste after production is completed, if using an air gun, please do not blow it into the tool holder to avoid unpredictable malfunctions.

If there is any unclean waste on the blade, please do not use metal objects to peel it off. Use a glue stick or toothpick to peel off to prevent damage to the blade.

⑶ Regularly open the rotating machine head cover, talk about the sliding shaft or rod inside the rotating machine head, wipe off the waste oil, and add an appropriate amount of butter to ensure machine lubrication, reduce processing noise, and extend machine service life.

2. Maintenance of other parts:

⑴ Before starting the machine each time, check whether the power supply of the machine is correct and whether the parameters in the program are consistent with the current processing wire.

If a card is found during use, please stop the machine immediately, turn on the power again, enter manual mode to check the card position, and eliminate the hidden danger.

Thank you for your patient reading. The above is an introduction to the details and maintenance items that need to be paid attention to during the operation of the coaxial peeling machine. Some of the content is from the internet and is for reference only. If you would like to learn more about the coaxial peeling machine, please feel free to call us for more information. We will be happy to serve you.